How to Update Router Firmware Using Default IP?

How to Update Router Firmware Using Default IP?

Millions of users around the world rely on WiFi routers for enjoying quick and reliable internet access. While most routers offer great WiFi coverage, however at times, a few problems can impact their efficiency. In that case, updating the firmware of those routers can help in a big way. If you are looking to know how to update router firmware, then you have stumbled upon the right post. Here, we're going to give you a nudge on the complete process of updating a WiFi router's firmware using its default IP. Up for executing the process? Here we go.

Update Router Firmware Using 192.168.1.1

192.168.1.1 is the default IP address that is being used for configuring a router and accessing its settings. You can also use the IP address for updating the firmware on your router so that your device can work at its optimum level. Below are steps explaining how you can update router firmware with the help of the default IP 192.168.1.1.

  • Make sure your router is connected to the internet source, be it a modem or DSL cable.
  • Also, check if all the LED lights on your router are glowing green. If not, check the cable connections between your modem and router.
  • Now, open a web browser on your computer and access the official site of the router for which you want to update the firmware.
    Note: No matter whether you use Chrome or Mozilla, Safari or IE web browser, make sure the one you use is running the latest software version and is free of browsing junk like cache and cookies.
  • Reaching the official site, locate the search option and enter the router model you have.
  • As soon as you press the Enter key, you will land on the specific product page.
  • Here, you can check if any new firmware version is available for your router or not.
  • If yes, download it on your system at a destination that is convenient to access by you.
  • Now, open a new tab on your browser and type the default IP address into the address bar.
    Note: Make sure you enter the IP address without making any typing mistake, else you may end up struggling with an error message saying 192.168.1.1 not working.
    Quick Tip: A few routers also support 192.168.1.0 IP address. Therefore, just in case 192.168.1.1 not working for you, try accessing the login page of your router using 192.168.1.0 instead.
  • Once you find yourself on the router login page, enter your default credentials into the given fields.
    Note: Have you ever changed the router login username and password? Yes? Well, in that case, you are advised to use the changed router login credentials.
  • Proceed further by hitting the Log In button.
  • You will then find yourself on the dashboard of your router.
  • Navigate to Settings > Administration.
  • Locate the Firmware Update option and click on it.
  • You will be asked to upload the file you have downloaded earlier.
  • Do the same by choosing the Browse option and then selecting the downloaded file.
  • Hit the Apply button to complete the process from your end.
  • However, you need to wait for a while to let your router complete the firmware update process.

This is all about how to update router firmware using default IP. We hope you get success with the overall process.

If you are still out of luck and unable to update router firmware using default IP, try accessing 10.0.0.1. This could be the IP supporting your router's model. Or, you can also get in touch with our expert technicians to help you update your router's firmware without any hassle.

Disclaimer: 192-168-1-1ip.co is providing online technical support services independently. All the information published on the website is for informational purpose only. We do not claim any sponsorship or endorsement of any third-party company.